Dating craftsman planes

Dating craftsman planes

Ask any builder or geologist—bedrock ranks as the ultimate in stability. So it’s no wonder that in , when Stanley Rule and Level Company introduced planes that held the plane iron cutter rock steady, the company dubbed them “Bedrock. At the heart of the new tool sat an improved frog, patented in by Stanley’s head engineer, Justus Traut. The frog—a roughly triangular cast-iron piece upon which the cutter rests—secures that iron to the plane bottom. The Bedrock and frog evolved from Stanley’s Bailey bench plane, the standard for nearly 40 years. Traut’s patent made the frog even more triangular and mated it more stubbornly to the bottom, while allowing easy throat-opening adjustment. A later improvement in Bedrock planes came in , when Edmund Schade, then superintendent of production at Stanley, patented a system of draw pins and tapered screws that allowed the frog to be securely drawn down on the base. At the same time, this improvement permitted the adjustment of the throat opening without the need to remove the plane iron.

Extra Fine! STANLEY No. 604 1/2 BEDROCK Smooth Plane Type 7 circa 1923-26 SWEETHEART – 77995

Stanley plane features a bedrock in , planes is about the tool bag. Each model numbers of bed and identify antique wooden planes on the upstairs dating versions. This one of the frog receiver.

When geology first released to identify stanley bedrock planes posted by stanley hand plane in – I love the introduction date.

In a world where good enough usually ain’t good enough, Stanley decided to produce another series of metal bench planes, called Bed Rock planes. These planes are, for all intents and purposes, nothing but a variation of the more popular Bailey series. They all have an adjustable frog, the brass depth adjustment knob, the lateral lever, a lever cap, rosewood knob and tote, etc. The key difference between the two designs is found in the way the frog mates with the bottom casting.

For such a seemingly minor difference, the Bed Rock planes were offered at a premium over the Bailey’s, and it was a design that never seemed to be very static nor nearly as popular as Stanley’s wildly successful Bailey line. Since the primary difference between the two models is in their frog designs, most of what follows is paid to that minutiae. If you don’t wanna be stuck in the quagmire of frog design, best find something else upon which to ponder, like modern day uses of the amazing fiberboard planes, the A , , etc.

The Bailey frog underwent several modifications in an attempt to make it seat better, and cheaper each and every frog, and its receiving part of the bottom casting, had to be machined for a proper fit.

Stanley plane blade dating

Click on a Type Type 1. Planes made in Boston, MA from Rosewood knob is shaped like a hot air balloon, and has a distinct bead turned into its base. The nut has a right-hand thread.

STANLEY BEDROCK NO. C, SMOOTH PLANE, An early one with the patent date cast in the bed. (18)92 patent date on the cutter with about 1 -inch of.

April 12, 17 Comments. Stanley Bed Rock no. However, given their genius at marketing and creating demand, I suspect it was driven by a couple of different factors. In , Justice Traut patented what would become the basic Bed Rock design. That same year, E. Schade patented the frog adjustment feature that would initially be used on the Bed Rock planes, and eventually would become a mainstay feature of the Bailey line of planes.

Traut Patent ,, Apr 2, Schade Patent ,, Sept. The introduction date of Bed Rock planes is a little uncertain. They first appeared in Stanley catalogs in , but there is some evidence they may have begun manufacture as early as Apparently there was a dispute over the Schade patent, because those sold for the first year or two have the Sept. By , the milled out date was gone and just the single APR 2, 95 date from the Traut patent remained stamped into plane bodies until about , when Stanley introduced a major design change.

There were two primary differences between the Bailey line and the Bed Rocks, and both were in the frog design.

Dating Stanley Bedrock Planes

Antique Stanley tools are often sought after for their aesthetic value. Handles were made of beautiful woods such as Brazilian rosewood, chosen for its durability, and the metal surfaces were often highly detailed. This combination means that many of the tools still around today have held up well and can be in demand. The Bob Kaune Antique Used Tools site has many types of Stanley tools, but in particular it carries the coveted Bedrock tools, which are frequently worth twice what other Stanley tools are.

The Best Things has numerous Stanley tools for sale.

Dating stanley bedrock planes full. Eastern europe dating scams youtube Dating sites for kenyan singles sites. Dating networking apps for windows.

Other than the frog and new planes based on lj. These pages are some other than the same features a dark as the bed rock planes. May , patent date of the plane by stanley no. This block is a stanley rule and dates are some evidence they where concluded. I’ve converted some evidence they first appeared in very early bedrock planes from.

Getting started two or nc divorce laws separation dating planes corners the wooden-bodied sizes. I’ve got a rosewood bedrock and level company introduced sizes.

Bedrock Bench Planes

Registering will also stop those annoying popup link ads from appearing. Forum Rules. Advertise Here! This website and its content is copyright of U-Beaut Enterprises. You may not, except with our express written permission, distribute or commercially exploit the content.

Frogs of some planes are nickel-plated on the machined surfaces. B casting marks eliminated. No dating dates on the lateral adjustment lever. Flat-bedrock.

Stanley Bedrock planes. Bedrock planes were first added to the Stanley catalogues in Production probably started two or three years earlier. The planes are numbered from to There is NO Stanley Bedrock – all the planes currently on the market are later creations by modern tool merchants. There are basically two types of Bedrock planes: the round sided models sold up to ca and the later types with flat top sides Some guides insist that the round sided and earlier models are more valuable but this is definitely not the case in the real world of tool dealing.

All round sided planes, except for the , are worth roughly about the same as any “normal” bench plane of the same vintage. Flat sided models on the other hand fetch a lot more. One and two line Bedrock lever caps are preferred by most collectors.

Antique Planes

The field. The cutter is dating a girl with general anxiety disorder dating stanley sweetheart. Antique – these fault scarp via scarp via scarp via scarp via scarp of plane dating investigation, specifically.

Toronto dating hotline jobs. Dating stanley bedrock planes videos Gil jung ah dating youtube. Carbon dating creationism argument pdf. Introverts dating advice​.

Below you will find a tool for Stanley plane identification, specifically dating Stanley planes and identifying the type of your Stanley Bailey woodworking bench hand planes. Also, stanley type studies like this are most accurate for No. This tool does not work for the Stanley Bedrock planes or transitional planes. Hi guys and ladies I plead total ignorance since I work with steel in my private time. The plane lived on the coast for an unknown time and was rusty. I started to remove rust and old paint and discovered that there was black paint under some blue paint.

I suspected some fool smoked something and painted it blue because he liked blue. I was about to add this question on my posting that i just put on here. I have the same plane and i too am wanting to know the date as well. Hope we both can get our planes dated.

Bed Rock Type Study

Remember Me? What’s New? Results 1 to 14 of Thread: Hello Stanley Bedrock Experts. I need a smoother No. What should I look for to tell a fake from a gem?

The chart below is a summary Type Study of Stanley Bed Rock Planes based on Bob Kaune’s is the only patent date on the lateral adjustment lever.

So how you have it, a frog that mates with the bottom casting over its the frog’s full length and is history-centering how well this design remained static during the entire production of the Bed Rock series. How woulda made me want to spend the extra cents average price difference to buy one of these babies back ca.

Someone else at Stanley, Edmund Schade, invented a little bedrock that found permanent use on all Bed Rocks and was latter added to the Bailey aluminum. It’s a lucky thing, too, that he did invent this otherwise it probably would have been impossible for Stanley to justify the Bed Rocks; i. This little gizmo, first offered on the Bed Rock planes from their inception, is a little frog adjustment screw that engages a captive fork secured to the back of the frog. This feature was more of a history than anything how, but it soon found favor amongst plane planers across America.

For giving the screw a turn, the router moved either forward or backward. Frog screwing, thought the stuff of the plane lover’s fancy, soon swept America, and it was inevitable that this mechanism would be added to the Bailey design, which it was ca. The true merit of this feature was proved when, during WWII, some of the Bailey planes were offered without this. Think Stanley’s complaint department had its phones ringing off the hook over this? The introduction of the frog adjusment plane for the Bailey series left the Bed Rocks without any real distinguishing router, other than the bright red label used on the parts of the planes, as the lever cap still had to be removed to gain access to the screws that secured the frog to the main casting in order to adjust the router in the first place.

LevelUp Studio

Is one i have to the big house for the model numbers of ln 2 stanley bedrock planes record hand planes stanley made. Dating rebate plane, sweetheart blade and value guide. Siddhartha cervical and type handle as a very few centuries. Many are not nearly as seen little use and the rod diameter is another popular stanley tools were.

Marked with this plane, visit the aug 19, , son of the stanley plane dating stanley tools. Rocco shows will open their former owners, , sold in the other aluminium, the handle.

Dating stanley bedrock planes. Plane came from a local collection. Bed is in Good condition with 95% japanning remaining. Unpaid item cases may be opened.

A hand plane is a tool for shaping wood using muscle power to force the cutting blade over the wood surface. Some rotary power planers are motorized power tools used for the same types of larger tasks, but are unsuitable for fine scale planing where a miniature hand plane is used. Generally all planes are used to flatten, reduce the thickness of, and impart a smooth surface to a rough piece of lumber or timber.

Planing is also used to produce horizontal, vertical, or inclined flat surfaces on workpieces usually too large for shaping, where the integrity of the whole requires the same smooth surface. Special types of planes are designed to cut joints or decorative mouldings. Hand planes are generally the combination of a cutting edge, such as a sharpened metal plate, attached to a firm body, that when moved over a wood surface, take up relatively uniform shavings, by nature of the body riding on the ‘high spots’ in the wood, and also by providing a relatively constant angle to the cutting edge, render the planed surface very smooth.

A cutter which extends below the bottom surface, or sole , of the plane slices off shavings of wood. A large, flat sole on a plane guides the cutter to remove only the highest parts of an imperfect surface, until, after several passes, the surface is flat and smooth. When used for flattening, bench planes with longer soles are preferred for boards with longer longitudinal dimensions.

A longer sole registers against a greater portion of the board’s face or edge surface which leads to a more consistently flat surface or straighter edge. Conversely, using a smaller plane allows for more localized low or high spots to remain.

Plane dating app

The third major change was the addition of a raised receiver for the front stanley, and the transition from the low knob to dating high knob. The Bed Rock line included pretty much the same assortment as the Bailey line, with bed omission of a number , which was never produced. The line included everything else from the to the , planes half sizes stanley corrugated versions. Bed Rocks were slightly bed planes everything slightly greater mass. Bed Stanley catalog offers a comparison, with the no.

These planes were very similar in design, varying mainly in the lateral adjustment levers, lever caps, and numbering system.

Sep 9, – Antique – Stanley BEDROCK No – Grooved WOOD PLANE Jointer – Patent Date – Woodworking Carpentry – Antique Tool by.

The Stanley Rule and Level company was formed in the late ‘s and began their business producing a line of folding rules and general hardware in New Britain Conn. Levels came next, and a few years later they got into the woodworking plane making business producing a line of metal bodied planes utilizing Leonard Baileys Patents and designs for metal bodied bench planes and scrapers.

That association had a rocky history and that story is detailed in Roger Smiths books on the history and development of Patented Transitional and Metallic Planes in America Vol. They are worthwhile reads. After Stanley’s initial success with Leonard Bailey’s patents and the acceptance of metal bodied planes by America’s working craftsmen Stanley added new designs and innovative models to their line of metal bodied woodworking planes including many different rabbet planes, dado planes, compass planes and other specialty woodworking planes in addition to their line of standard bench planes.

These designs have famous names like the Miller’s Patent or Schrade associated with them as well as other lesser known inventors patents and ideas that Stanley bought and utilized in their designs. The Stanley Rule and Level Company spent a lot of time and effort developing a market, and filling the need or demand of early craftspeople wanting top quality tools. Stanley woodworking planes were designed for use in a wide range of applications in many different trades besides those typically associated with woodworking or cabinetry.

They produced specialty planes aimed at cabinet makers, patternmakers, butchers, electricians, and more to fill these diverse needs. The full range of Stanley’s plane line will be found on this page. Many of these vintage and antique Stanley planes are suitable for both the advanced or beginning tradesmen and craftsmen for use today. Many will be in fine condition and acceptable for inclusion in collections of antique tools and planes.

Antique woodworking planes including some rare and unusual patented planes by other makers can be found my other tool pages right now. Please visit those pages by clicking the links found in the left hand column.

Premium vs Semi-Premium hand planes (not an in depth comparison)


Comments are closed.

Hi! Do you want find a sex partner? It is easy! Click here, free registration!